News Webinar

Join us at 14:30 on 8 October for the Came webinar organised by Electric Motor Engineering.

Why take part?

• • Find out how Came technical consultancy can make a difference in electric motor design and optimisation.
  • Learn more about the Came co-design approach, which integrates design and production to reduce times and costs.
  • Understand how our R&D team can improve the performance, quality and compliance of your motors.

 
 
Register for the webinar now
 
🎙 Speaker: Fabrizio Bardelli, Came’s R&D expert
🗓 Data: Wednesday, 8 October 2025
⏰ Time: 14:30 (Italian time)
🌐 Language: English
📍 Where: Online (Zoom)
🤝 Organiser: Electric Motor Engineering
 

What is the webinar about?

In the webinar, we will explore the effectiveness of Came technical support through two actual case studies:

• • The first covers making a BLDC prototype, with full support during co-design, insulation development, 3D prototyping and technical validation.
  • The second is dedicated to optimising insulation for motors powered by inverters, in accordance with IEC EN 60034-18-41, with the aim of increasing robustness to electrical interference (Partial Discharge) and improving the IVIC level.

 
We will discuss how to apply a co-design approach that involves design and production, best practices for rapid prototyping and electrical insulation, how to identify and overcome critical issues in production right from the concept stage, and the concrete performance, quality and cost benefits that Came can bring.

Join us at 14:30 on 9 April for the Came webinar.

Why take part?

• • Discover the benefits of having Came as a single contact point for the entire die-casting process, reducing time and management costs.
  • Learn more about Came co-design, which optimises the product and process from the very beginning.
  • Understand how the Came team can improve the design of your components.

 
REGISTER FOR THE WEBINAR NOW

🎙 Speaker: Davide Urbani, Area Technical Manager of the Die-Casting Div.
🗓 Date: 09 April 2025
⏰ Time: 14:30 (Italian time)
🌐 Language: Italian
📍 Where: Online (Zoom)

What is the webinar about?

The webinar will explore the value of relying on Came as an All-in-One Solution Provider, a partner capable of following the entire die-casting process from design to mass production, eliminating intermediate steps and optimising times and costs. We will see how co-design allows us to study geometries and materials from the very beginning, to provide efficient solutions that guarantee product feasibility and maximum reliability. We will delve into the processes used by Came, including automatic blanking, vacuum systems, sandblasting, machining, and 100% leak testing, and analyse their roles in final product quality.

In addition, we will talk about how die design affects machine downtime reduction and management costs, thanks to solutions that simplify maintenance and prevent wear. We will also focus on the benefits of automating the production process, which reduces human error, ensures greater stability and optimises production times.

Join us at 14:30 on 11 December for the Came webinar.

Why take part?

• • Find out how to design motors that comply with Regulation (EU) 2019/1781 and achieve high efficiency standards.
  • Learn the latest techniques for developing, optimizing and testing prototypes.
  • Keep up to date on the main innovations and trends in the electric motor sector.

 
REGISTER NOW FOR THE WEBINAR

🎙 Speaker: Fabrizio Bardelli, Research and Development Manager in Came
🗓 Date: Wednesday, 11 December 2024
⏰ Time: 14:30 (Italian time)
🌐 Language: English
📍 Where: Online (Zoom)

It is an opportunity to learn more about the latest innovations and practical solutions in developing high-efficiency single-phase motors in accordance with the most stringent standards. Whether you are an engineer, designer or industry professional, this webinar will provide you with valuable knowledge to tackle current challenges and stay ahead of market trends.

What is the webinar about?

The webinar will focus on developing and optimizing IE2 single-phase motors that comply with Regulation (EU) 2019/1781. During the event, we will analyse challenges and solutions adopted in designing motors to guarantee high energy efficiency by minimizing losses and complying with European regulatory requirements. We will present technical details regarding material selection, prototype design, and design optimization based on test results.

A large section will be dedicated to bench testing, which is essential to verify and improve motor performance. We will illustrate the measurement methods used, such as the Direct Measurement procedure according to IEC EN 60034-2-1, and show the results obtained in the various development stages. Participants will learn more about the importance of testing with a view to improving efficiency and reducing production costs.

Finally, we will discuss new technologies and software tools, such as Motor-CAD, used to speed up the design and optimization process. We will examine the advantages and disadvantages of design choices in terms of costs and outcomes, and offer a complete, detailed overview of best practices in developing high-efficiency electric motors.

The webinar is an unmissable opportunity to expand your technical skills, meet industry experts, and discover practical strategies to improve motor efficiency.

Spin, a company active in designing, prototyping and industrialising electric motors and electromechanical devices, invited Fabrizio Bardelli, R&D expert at Came, to speak in the webinar on the differences between distributed and concentrated winding.

The webinar will focus on design from a technological perspective and Fabrizio Bardelli will talk about the pros and cons of winding design solutions and how they affect electric motors in terms of efficiency, cost saving and sustainability.

The webinar will be moderated by Luigi Rizzi, Technical Director of Spin, and the speakers will be Alberto Rubino, Electrical Engineer at Spin, and Fabrizio Bardelli.

 
REGISTER FOR THE WEBINAR
 
AGENDA

• Luigi Rizzi, Spin
  • Spin & Came Introduction
• Alberto Rubino, Spin
  • Technical design: distributed winding vs. concentrated winding
  • Simulation tools
  • Electromagnetic, thermal and mechanical analysis: the main challenges
  • Electrical, thermal and vibroacoustic characterisation on the test bench
  • Electric motor performance: pros and cons of the two winding types
• Fabrizio Bardelli, Came
  • Technological pros and cons, the advantages and disadvantages of the two winding types from an industrial process (processing) and materials perspective
  • Distributed winding
  • Concentrated winding
• Questions and answers

The webinar Electronics and mechanics for future mobility: Electric motor: smaller size for better performance organised by the Electric Motor Engineering magazine will be held at 10:00 on Tue 28 Feb, and Came will be taking part with its R&D expert Fabrizio Bardelli.

What is the webinar about?
The entire automotive industry will have to adapt its production model to accommodate an irreversible transformation. The whole power line will have to be rethought; smaller, lighter electric motors will need to ensure high performance and reliability. Everything needs to be re-engineered with new solutions; on-board, control and powertrain management electronics will be increasingly important.

What will our R&D expert talk about?
Fabrizio Bardelli will talk about the pros and cons of winding design solutions and how they affect the efficiency of electric motors. Fabrizio will also detail the relationship between design and testing, how partial discharges have an impact on electric motor life and what solutions can be adopted to reduce the effect.

The webinar will be open to everyone and moderated by Prof. Marco Villani.

REGISTER FOR THE WEBINAR

Speaker: Fabrizio Bardelli
Webinar duration: 2 hours
Language: English

For more information, write to: consulting@came-italy.com